Wednesday, January 26, 2011

Anhui Automotive Electronics Industry Signed A Strategic Alliance Established Technological

December 16, 2009, from Chery Automobile Co., Ltd., Anhui JAC Automobile Co., Ltd., Anhui Ankai Automobile Co., Ltd., Anhui Hualing Automobile Co., Ltd., Wuhu Chery Technology Co., Ltd. and other large backbone of automotive original equipment manufacturing enterprises and edge automotive electronics enterprises as the main body supporting joint Hefei University of Technology, Anhui Institute of Engineering Science and Technology, Huishang Bank, Ebizal Venture Capital Co., Ltd., including 18 units set up in Anhui Province to launch automotive electronics industry technology innovation strategic alliance contract, marking the Anhui automobile industry technological innovation in key areas of strategic cooperation was formally initiated.


The automobile industry is an important pillar industry in Anhui Province in recent years has achieved rapid development, particularly in the face of the international financial crisis, struggling to "turn overtaking", showing contrarian growth. The first 11 months of 2009, total production 807,000 cars, break through 100 billion total industrial output value. To meet the automotive industry, energy saving, environmental protection, safety, comfort technology development trends and to promote new energy vehicles and strategic development of new industries, increase automotive electronic technology and product innovation has become essential. Anhui Atech Automotive (Wuhu) Co., Ltd., Wuhu Bethel Automotive Safety Systems Co., Ltd., Wuhu Mosentaike Auto Technology Co., Ltd., Wuhu Jie Nuorui Automotive Electrical System Co., Ltd., Hefei Masateru Automotive Electronics Co., Ltd. and a number of automotive electronics enterprises in the automotive electronic control technologies, automotive electronics and other fields supporting the formation of a relatively strong capacity and a high level of technology.


The automotive electronics industry in Anhui Province, signed the formation of strategic alliances for the purpose of technological innovation is to further explore effective models to promote the host and supporting production enterprises, universities and research institutes effective integration at the strategic level, to capture a number of common automotive electronics industry, the key and cutting-edge technology problems, to break through the bottleneck of the development of technical and institutional constraints, form a number of leading electronics industry innovation leader of the joint team and enhance the automotive electronics industry in Anhui Province, of independent innovation capability and core competitiveness, reduce the world's advanced level gap.


Construction of Anhui Province, automotive electronics industry, technological innovation on the bigger and stronger strategic alliances Anhui automobile industry to achieve stable and rapid and sustainable development, of great significance. The next 3-5 years, Anhui Science and Technology Department will be in accordance with the implementation of national technical innovation projects and experiments and demonstration work in Anhui Province, continue to promote new energy vehicles and other technologies to build industrial technology innovation and strategic alliances, guiding coalition established in accordance with the Constitution of technological innovation goals and tasks, focus on technological innovation to solve the province's auto industry at the strategic level issues, play production and research co-operation and integration of the overall advantages of the linkage effects of innovative technologies to achieve resource sharing, to extend the auto industry chain and supply chain, in order to achieve sustained, rapid auto industry in Anhui Province to play an important role in healthy development.


About the Author:
I am a professional writer from China Products, which contains a great deal of information about zero halogen cable , lc patch cords, welcome to visit!

]]>

View the original article here

Testing The Bumper Effect In Hondas, Toyotas

Even at very slow speeds a rear-end collision could end up costing thousands of dollars. The reason for this is the variety of bumpers out on the road. Right now there is no regulation for standardizing bumpers on cars, trucks, SUVs and vans.


The Insurance Institute recently tested the outcome of accidents between a car and a small SUV by choosing one of each from seven different automakers, and then caused them to run into each other at 10 mph, both with the car striking the SUV from behind, and the SUV rear-ending the car. The difference in total damage ranged from $2,995 when a Honda CR-V collided with a Honda Civic, to $9,867 caused when a Toyota Corolla rear-ended a Toyota RAV4.


So why is the cost so high, even at low speeds? According to the Insurance Institute, the main issue is the bumper height and quality. Although all vehicles drive on the same roads, they do not all follow the same regulations when it comes to design, especially in the bumper. Federal laws require cars to have bumpers between 16 and 20 inches from the ground, while trucks and SUVs have no bumper regulations at all. Even car-based crossovers do not follow a cars bumper height law. As a result, when a car rear-ends an SUV, the bumper of the car often passes underneath the SUVs, which leads to expensive damage.


And the bulk of this damage is not always on the car. In the most expensive accident, between Toyotas Corolla and RAV4, the larger RAV4 accounted for the majority of the cost, with $6,015 in damage.


Another issue that contributes to the high cost is the quality of the bumpers. The two Honda vehicles that were tested, the Civic and CR-V, had the smallest difference in bumper height, but still accumulated $3,000 in damage. The Insurance Institute attributes this to bumpers being weaker than they used to be. Although they were once required to endure impacts at five miles-per-hour, bumpers now only have to withstand collisions at half of that speed to pass inspection.


However, the National Highway Traffic Safety Administration disagrees. While they acknowledge that todays bumpers have become slightly weaker, they claim that this has only led to a slight increase in repair cost. They also state that weaker bumpers are necessary, because higher regulations would negatively affect the functionality and off-road performance of trucks and SUVs. Additionally, although these issues have resulted in a higher cost and more damage to the vehicle, they have not compromised the safety of the passengers.


Consumers also have differing thoughts about this issue. Some people believe all vehicles should follow the same regulations, while others feel that vehicles with different functionalities should have different standards, and the higher bumpers on trucks and SUVs are essential for job performance and driving in inclement weather.


The National Highway Traffic Safety Administration accepted comments from the public on this issue through August 2009, and may make regulation changes after reviewing all of the comments, as well as studying other data acquired.


About the Author:
Al Hunter works as a freelance writer and marketer for companies like CarLocate, a web car listing service with new and used cars for sale. They are located at www.CarLocate.com . When he is off the clock, Al writes about and stays up-to-date on the latest marketing innovations, and follows the latest news about the automotive industry and cars.

]]>

View the original article here

Tuesday, January 25, 2011

Kips Bay Towing A True

New York city the grate big apple ,the city that never sleeps day in and day out the streets are busy with cars ,vans and transport truck in the busy avenues and cross streets. Having lived in this grate city for 15 years now I must say I have had my share of brake downs and in wait of a Towing companyto show up in all odd hours of the day well I guess that comes along with having an 1998 year car and not up to its regular maintenance up keeps. Kips bay Towing is a handy towing truck company to be kept at times like this


This past December New York had a snow blizzard where hundreds of cars and trucks where broken down and snowed in . All the boroughs was at a stand still for a few days , schools were closed and cars scattered in all highways and regular streets in the city ,where the snow plows had a hard time cleaning the streets. Kips Bay Towing had hundreds of calls from stranded motorist most of them on highways, unfortunately not all towing companiescan provide service on highways here in new York city due to a contract license that is in need and only one towing company is given that permit after a bid is placed and won by that company.


Kips Bay Towing in Manhattan was busy 24 hours a day trying to keep the volume of the clients and callers that had got there number from the internet. My car been stuck in the snow for one hour called Kips Bay towing company .And I was given good advise by the dispatcher not to skid the tires in one place trying to get out of the snow if so the transmission will burn out, but then it was too late. Wish I had called them sooner .Kips Bay Towing like a Knight in shining armor came to the rescue and towed me to there repair shop and saved the day


About the Author:

]]>

View the original article here

Oil Change – Things To Do And Things You Should Not Do

An oil change is a relatively simple car maintenance task that should be performed on a regular basis. Just how important is this automotive chore? Well, most drivers have been told since they were old enough to get behind the wheel of the necessity for a regular oil change. It’s true that the car’s longevity can be greatly extended if driven with pure, unsoiled lubricants. Here are some do’s and don’ts to think about:


- DO read your owner’s manual to find out what the manufacturers’ recommendations are. Some vehicles need to have the fluids changed every 3,000 miles while others are fine with 5,000 miles or more between servicing.


- DON’T forget that certain driving conditions may cause the frequency requirement to be altered one way or the other. Examples may include heavy duty operation, toting trailers or other heavy loads, living in regions that have excessive hot or cold temperatures, mountain driving or daily commutes in heavy traffic.


- DO check your fluid levels on a regular basis. It’s important to monitor the levels regularly. If an engine is losing oil, this issue needs to be explored. Problems may be occurring that are causing the excess use. Big mechanical troubles will occur if it completely runs out.


- DO stop the engine when checking levels. Pull the dipstick out and wipe it off, then replace it. Now count to ten and pull it out again to read. This will give a more accurate assessment than just pulling it out once.


- DON’T forget to set the emergency brake when performing this task by yourself. Putting bricks, chocks or blocks behind the tires will keep the automobile from sliding while you’re under it.


- DON’T wear clothes you care about to perform this task. Oily residue is quite difficult to get out with traditional laundry soap. Even if most of it comes out, a telltale darkened spot on the fabric will likely remain.


- DON’T change fluids with a cold engine: If you’re going to do this job yourself, warm your car up before beginning.


- DO consider using synthetics or blends of petroleum with synthetics. These products can increase time span between changes if used properly.


- DON’T believe everything you hear about oil additives depending on the source. These are often gimmicks designed to generate cash for the salesperson but do little for the performance of your sedan, truck or SUV.


- DON’T forget to ask about the training of the technician. Although this is one of the simpler automotive tasks, the tech should still be well trained and competent. If this chore is botched up by a clueless tech, mechanical problems can occur that will be quite expensive to repair.


- DO take your car into a shop owned by a local businessperson. Local owners who live in the neighborhood care about their fellow townsfolk and community, and in giving them business, you are keeping money within the community and contributing to the progress of your area.


- DO jog your memory in some way in order to stay on track. Stickers on the windshield, a note on your calendar or reminder card from the shop will all do the trick.


When it’s time to have an oil change, get it done on schedule. Whether it’s a DIY job or taken to the shop, timeliness is important, and that’s the bottom line.


About the Author:
When they need an oil change, Gulfport, MS, area residents can trust in the services of local professionals. To find a local garage to take care of your automotive maintenance needs, please visit http://www.meineke-gulfportbiloxi.com/

]]>

View the original article here

Monday, January 24, 2011

Klystron

History


The brothers Russell and Sigurd Varian of Stanford University are the inventors of the klystron. Their prototype was completed in August 1937. Upon publication in 1939, news of the klystron immediately influenced the work of US and UK researchers working on radar equipment. The Varians went on to found Varian Associates to commercialize the technology (for example to make small linear accelerators to generate photons for external beam radiation therapy). In their 1939 paper, they acknowledged the contribution of A. Arsenjewa-Heil and Oskar Heil (wife and husband) for their velocity modulation theory in 1935.


The work of physicist W.W. Hansen was instrumental in the development of klystron and was cited by the Varian brothers in their 1939 paper. His resonator analysis, which dealt with the problem of accelerating electrons toward a target, could be used just as well to decelerate electrons (i.e., transfer their kinetic energy to RF energy in a resonator). During the second World War, Hansen lectured at the MIT Radiation labs two days a week, commuting to Boston from Sperry gyroscope company on Long Island. His resonator, called a “hohlraum” by nuclear physicists and coined “rhumbatron” by the Varian brothers, is used in 2009 in the National Ignition Facility investigating nuclear fusion. Hansen died in 1949 as a result of exposure to beryllium oxide (BeO).


During the second World War, the Axis powers relied mostly on (then low-powered) klystron technology for their radar system microwave generation, while the Allies used the far more powerful but frequency-drifting technology of the cavity magnetron for microwave generation. Klystron tube technologies for very high-power applications, such as synchrotrons and radar systems, have since been developed.


Explanation


Klystrons amplify RF signals by converting the kinetic energy in a DC electron beam into radio frequency power. A beam of electrons is produced by a thermionic cathode (a heated pellet of low work function material), and accelerated by high-voltage electrodes (typically in the tens of kilovolts). This beam is then passed through an input cavity. RF energy is fed into the input cavity at, or near, its natural frequency to produce a voltage which acts on the electron beam. The electric field causes the electrons to bunch: electrons that pass through during an opposing electric field are accelerated and later electrons are slowed, causing the previously continuous electron beam to form bunches at the input frequency. To reinforce the bunching, a klystron may contain additional “buncher” cavities. The RF current carried by the beam will produce an RF magnetic field, and this will in turn excite a voltage across the gap of subsequent resonant cavities. In the output cavity, the developed RF energy is coupled out. The spent electron beam, with reduced energy, is captured in a collector.


Two-cavity klystron amplifier


In the two-chamber klystron, the electron beam is injected into a resonant cavity. The electron beam, accelerated by a positive potential, is constrained to travel through a cylindrical drift tube in a straight path by an axial magnetic field. While passing through the first cavity, the electron beam is velocity modulated by the weak RF signal. In the moving frame of the electron beam, the velocity modulation is equivalent to a plasma oscillation. Plasma oscillations are rapid oscillations of the electron density in conducting media such as plasmas or metals.(The frequency only depends weakly on the wavelength). So in a quarter of one period of the plasma frequency, the velocity modulation is converted to density modulation, i.e. bunches of electrons. As the bunched electrons enter the second chamber they induce standing waves at the same frequency as the input signal. The signal induced in the second chamber is much stronger than that in the first.


Two-cavity klystron oscillator


The two-cavity amplifier klystron is readily turned into an oscillator klystron by providing a feedback loop between the input and output cavities. Two-cavity oscillator klystrons have the advantage of being among the lowest-noise microwave sources available, and for that reason have often been used in the illuminator systems of missile targeting radars. The two-cavity oscillator klystron normally generates more power than the reflex klystronypically watts of output rather than milliwatts. Since there is no reflector, only one high-voltage supply is necessary to cause the tube to oscillate, the voltage must be adjusted to a particular value. This is because the electron beam must produce the bunched electrons in the second cavity in order to generate output power. Voltage must be adjusted to vary the velocity of the electron beam (and thus the frequency) to a suitable level due to the fixed physical separation between the two cavities. Often several “modes” of oscillation can be observed in a given klystron.


Reflex klystron


In the reflex klystron (also known as a ‘Sutton’ klystron after its inventor), the electron beam passes through a single resonant cavity. The electrons are fired into one end of the tube by an electron gun. After passing through the resonant cavity they are reflected by a negatively charged reflector electrode for another pass through the cavity, where they are then collected. The electron beam is velocity modulated when it first passes through the cavity. The formation of electron bunches takes place in the drift space between the reflector and the cavity. The voltage on the reflector must be adjusted so that the bunching is at a maximum as the electron beam re-enters the resonant cavity, thus ensuring a maximum of energy is transferred from the electron beam to the RF oscillations in the cavity. The voltage should always be switched on before providing the input to the reflex klystron as the whole function of the reflex klystron would be destroyed if the supply is provided after the input. The reflector voltage may be varied slightly from the optimum value, which results in some loss of output power, but also in a variation in frequency. This effect is used to good advantage for automatic frequency control in receivers, and in frequency modulation for transmitters. The level of modulation applied for transmission is small enough that the power output essentially remains constant. At regions far from the optimum voltage, no oscillations are obtained at all. This tube is called a reflex klystron because it repels the input supply or performs the opposite function of a klystron.


There are often several regions of reflector voltage where the reflex klystron will oscillate; these are referred to as modes. The electronic tuning range of the reflex klystron is usually referred to as the variation in frequency between half power pointshe points in the oscillating mode where the power output is half the maximum output in the mode. It should be noted that the frequency of oscillation is dependent on the reflector voltage, and varying this provides a crude method of frequency modulating the oscillation frequency, albeit with accompanying amplitude modulation as well.


Modern semiconductor technology has effectively replaced the reflex klystron in most applications.


Multicavity klystron


Large klystrons as used in the storage ring of the Australian Synchrotron to maintain the energy of the electron beam


In all modern klystrons, the number of cavities exceeds two. A larger number of cavities may be used to increase the gain of the klystron, or to increase the bandwidth.


Tuning a klystron


Some klystrons have cavities that are tunable. Tuning a klystron is delicate work which, if not done properly, can cause damage to equipment or injury to the technician. By adjusting the frequency of individual cavities, the technician can change the operating frequency, gain, output power, or bandwidth of the amplifier. The technician must be careful not to exceed the limits of the graduations, or damage to the klystron can result.


Manufacturers generally send a card with the unique calibrations for a klystron’s performance characteristics, that lists the graduations to be set to attain any of a set of listed frequencies. No two klystrons are exactly identical (even when comparing like part/model number klystrons), and so every card is specific to the individual unit. Klystrons have serial numbers on each of them to uniquely identify each unit, and for which manufacturers may (hopefully) have the performance characteristics in a database. If not, loss of the calibration card may be an insoluble problem, making the klystron unusable or perform marginally un-tuned.


Other precautions taken when tuning a klystron include using nonferrous tools. Some klystrons employ permanent magnets. If a technician uses ferrous tools, (which are ferromagnetic), and comes too close to the intense magnetic fields that contain the electron beam, such a tool can be pulled into the unit by the intense magnetic force, smashing fingers, injuring the technician, or damaging the unit. Special lightweight nonmagnetic (aka diamagnetic) tools made of beryllium alloy have been used for tuning U.S. Air Force klystrons.


Precautions are routinely taken when transporting klystron devices in aircraft, as the intense magnetic field can interfere with magnetic navigation equipment. Special overpacks are designed to help limit this field “in the field,” and thus allow such devices to be transported safely.


Optical klystron


In an optical klystron the cavities are replaced with undulators. Very high voltages are needed. The electron gun, the drift tube and the collector are still used.


Floating drift tube klystron


The floating drift tube klystron has a single cylindrical chamber containing an electrically isolated central tube. Electrically, this is similar to the two cavity oscillator klystron with a lot of feedback between the two cavities. Electrons exiting the source cavity are velocity modulated by the electric field as they travel through the drift tube and emerge at the destination chamber in bunches, delivering power to the oscillation in the cavity. This type of oscillator klystron has an advantage over the two-cavity klystron on which it is based. It only needs one tuning element to effect changes in frequency. The drift tube is electrically insulated from the cavity walls, and DC bias is applied separately. The DC bias on the drift tube may be adjusted to alter the transit time through it, thus allowing some electronic tuning of the oscillating frequency. The amount of tuning in this manner is not large and is normally used for frequency modulation when transmitting.


Collector


After the RF energy has been extracted from the electron beam, the beam is destroyed in a collector. Some klystrons include depressed collectors, which recover energy from the beam before collecting the electrons, increasing efficiency. Multistage depressed collectors enhance the energy recovery by “sorting” the electrons in energy bins.


Applications


Klystrons produce microwave power far in excess of that developed by solid state. In modern systems, they are used from UHF (100’s of MHz) up through hundreds of gigahertz (as in the Extended Interaction Klystrons in the CloudSat satellite). Klystrons can be found at work in radar, satellite and wideband high-power communication (very common in television broadcasting and EHF satellite terminals), and high-energy physics (particle accelerators and experimental reactors). At SLAC, for example, klystrons are routinely employed which have outputs in the range of 50 megawatts (pulse) and 50 kilowatts (time-averaged) at frequencies nearing 3 GHz Popular Science’s “Best of What’s New 2007? included a company Global Resource Corporation using a klystron to convert the hydrocarbons in everyday materials, automotive waste, coal, oil shale, and oil sands into natural gas and diesel fuel.


Confusion with krytron


A misleadingly similarly named tube, the krytron, is used in simple switching applications. It has recently gained fame as a rapid switch which can be used in nuclear weapons to precisely detonate explosives at high speeds, in order to start the fission process. Krytrons have also been used in photocopiers, raising issues of war technology transfer to countries for items such as this, which have a “dual use.”


See also


Crossed-field amplifier


Electromagnetic radiation


Free electron laser


Gyrotron


Inductive output tube


Linear accelerator


Magnetron


Backward wave oscillator


Particle accelerator


Traveling wave tube


Waveguide


References


^ Varian, Russell H.; Varian, Sigurd F. (1939). “A High Frequency Oscillator and Amplifier”. Journal of Applied Physics 10: 321. doi:10.1063/1.1707311. 


^ A. Arsenjewa-Heil and O. Heil, “New method of producing short, undamped waves of great intensity (translated title)”, Zeitschrift fur Physik, vol. 95, no. 11-12 (12 July 1935), pp. 752-762 (Germany).


^ “PopSci’s Best of What’s New 2007?. Popsci.com. http://www.popsci.com/popsci/flat/bown/2007/green/item_67.html. Retrieved 2010-02-28. 


^ “PopSci’s Best of What’s New 2007?. Popsci.com. http://www.popsci.com/popsci/flat/bown/2007/innovator_2.html. Retrieved 2010-02-28. 


^ US Patent 7629497 – Microwave-based recovery of hydrocarbons and fossil fuels Issued on December 8, 2009


External links


Animation of how a Klystron works


(Two cavity klystron)


(Multicavity klystron)


(Reflex klystron)


(High power for linear accelerator)


History of the Klystron from Varian


Stanford Linear Accelerator Center (249) Klyston Gallery Pictures


Klystron collection in the Virtual Valve Museum


Klystron Amplifier


“Microwave Gun” klystron developed at the SLAC


Categories: Particle accelerators | Vacuum tubes | Microwave technology | American inventions


About the Author:
I am an expert from China Chemicals Products, usually analyzes all kind of industries situation, such as galaxy electric showers ,

]]>

View the original article here

Stunt Race Fx

Gameplay


Stunt Race FX appears to be like a zany version of SEGA’s Virtua Racing. The gameplay differs from Nintendo’s own Super Mario Kart by being somewhat more difficult and through the lack of weapons to use to attack other vehicles in the game. Similarities with Nintendo’s F-Zero include the ability to boost the speed of the vehicles, the use of the L and R buttons to make sharper turns, and the possibility of damaging vehicles by running into walls, hazards, or other vehicles; falling damage is also possible.


Vehicles


There are three vehicles to choose from originally (COUPE, F-Type, and 4WD), and a fourth is unlockable (2WD); a fifth vehicle is only used in bonus games (TRAILER). Stunt Race FX’s use of eyes on the vehicles was a late-in-development addition, to give character to otherwise personality-free cars. Each vehicle has different capabilities in terms of speed, body and acceleration. According to the instruction booklets in English, the vehicles are male; however, according to the Japanese instruction manual and the Japanese television commercial, the COUPE is female and every other vehicle is male.


COUPE – A small, yellow, car with balanced settings. She is based on the car body style of the same name and is the only female car in the game. COUPE’s MAX SPEED is 120 MPH (190 km/h), and she offers stable performance and tight steering. Her Boost meter consumption is also lower than the other vehicles; if the player controls COUPE well, the player can save a lot of time. Her tire grip is relatively low, however, which can require the player to use the L and R buttons to drift in the corners (while making sure not to slow down too much). COUPE is designed for intermediate players.


F-Type – A Formula One-like vehicle. His MAX SPEED is 140 MPH (220 km/h). He can be turned and controlled quickly and easily, because of his strong down-force, and accelerates very quickly to top speed. However, his ability to take damage is the weakest of all the vehicles. F-Type is designed for advanced players, who can either try drifting with the L and R buttons, or run F-Type more safely by controlling the gas pedal to match the tire grip. Players must be careful to adjust the balance of F-Type in mid-air using the steering buttons to land safely, due to his weak body; this technique is very important for anyone who uses F-Type.


4WD in a typical race around the “Easy Ride” course.


4WD – A monster truck-like vehicle that has a powerful engine to balance his heavy weight. He is a monster machine with very large tires that give great grip performance, and is unsurpassed for off-road driving. His MAX SPEED is 100 MPH (160 km/h), making him the slowest vehicle (except the bonus-game-only TRAILER), and his steering is particularly heavy, which might require a player to turn quickly at every curve. He is, however, the easiest vehicle to use in STUNT TRAX, according to the game’s instruction booklet, and is designed for beginner players. While cornering, even if a player kept using the L and R buttons to steer harder, 4WD hardly spins. 4WD is the only vehicle players can use in TEST RUN.


2WD – A two-wheeled car. Due to its shape and the fact that it has only two wheels, it is commonly mistaken for a motorcycle, although it has a windshield. He can only be used in FREE TRAX after a player beats NOVICE class in SPEED TRAX; however, if a player clears MASTER class in SPEED TRAX, 2WD can be used in all modes. If a player uses the cornering buttons (L and R), 2WD will turn by shifting his weight left and right while leaning his body. However, it is difficult to recover when 2WD loses balance. His MAX SPEED is 140 MPH (220 km/h).


TRAILER – A special semi-trailer truck that can only be played in each SPEED TRAX Bonus Game. Because of his very large size and the flexibility of the hitch between the cab and trailer, he is very tough to drive. The SPEED TRAX Bonus Game featuring TRAILER uses a different camera angle, which can make controlling this vehicle more confusing than the others. It is impossible to damage this vehicle.


Modes


The game features five modes: three for racing levels, one for obstacle courses, one for test-driving, one for time-attacking and one for multiplayer racing.


SPEED TRAX – This mode can only be played by one player. Player must beat a class in order to move up to the next class. Each class has four courses and a Bonus Game. There are three classes: NOVICE (for beginner players), EXPERT (for intermediate players) and MASTER (for advanced players). For a total of fifteen tracks (twelve courses and three Bonus Games). To complete a course, player must complete three laps before time runs out. Every time a player completes a lap or passes through a Checkpoint, the countdown timer will extend. After the third lap is completed, all the time left will be taken to the next course. However, players can not carry more than 100 seconds. There are three rival vehicles for a player to compete against. If a player makes a vehicle he or she controls run of course into a water hazard, completely fill up the Damage meter and destroys it, run in fourth/last place or if the timer drops to zero, player loses a try and restarts the race on the same course he or she was on. If runs out of tries, the game is over. Bonus Games are the only courses in this mode that allows players to either play them or not. They are also the only courses in the game where players can earn extra tries, just in case if players often lost races and wanted to try a few more times.After EXPERT class has been cleared, MASTER class will be unlocked.


STUNT TRAX – The goal of this mode is to drive all the way through each course as fast as possible while touching every star in sight to make a perfect score. There are four courses exclusive in this mode: Ice Dance, Blue Lake, Rock Field and Up’n Down. There are four Areas and three gates per course. When driven through a gate, the gate will close, making the player unable to reenter the previous Areas already passed through. A Special Course called Radio Control can be unlocked after the other four courses have been cleared. Unlike the other four courses, Radio Control doesn’t have any stars nor gates, which it is actually a destruction derby course with the style of radio-controlling. The goal in this course is to run the vehicle the player is controlling into every other vehicle to destroy them.


BATTLE TRAX – This mode is for head-to-head racing. Up to two computer players or human players can participate in this mode. For a computer player or two, players must have both standard controllers plugged in, while leaving at least one of them alone, in order to activate a computer player or two. There are four courses exclusive in this mode: Marine Pipe, Port Arena, Cotton Farm and Toxic Desert (titled as Toxic Dessert in the game).


TEST RUN – This mode is designed for beginners to practice by test-driving. Only one vehicle (4WD) and one nameless course is playable in this mode. After finishing three laps, the screen blacks out while the mode select screen returns. After FREE TRAX is unlocked, TEST RUN will no longer be playable; however, if the saved data was erased after FREE TRAX is unlocked, TEST RUN will be playable again.


FREE TRAX – This mode can only be unlocked by beating either NOVICE class or EXPERT class in SPEED TRAX. Players use this mode for practicing courses from completed SPEED TRAX classes, including ones that are from the Bonus Games. This mode is also used for time-attacking. There is no time limit.


Graphics


The capabilities of the Super FX chip are demonstrated extensively in Stunt Race FX. Each course appears to be constructed with 3D polygons, complete with road bumps and overhead passes, resulting in a considerably large number of animation screens. Detailed billboard advertisements also appear throughout each race course. These realistic representations were possible on the Super NES because the Super FX chip rendered 2D sprites in a visual format that resembled 3D polygons. Under this format, polygons would not “crash” together to become distorted, though the graphics would run slower. This lack of speed was incorporated into the gameplay by featuring cars that were heavier and clumsier than those included in conventional racing games.


Since polygons would not crash together under the FX graphics chip, it became impossible to depict cars crashing into water or being submerged in water. In courses with lakes or rivers, where it is possible for the player to run off the race course into the water, the player’s vehicle automatically veers off-screen when the vehicle is about to enter a body of water. The game screen then fades-out to return to another camera angle.


History


Development


In 1991, Nintendo began developing a custom 3D cartridge chip called the Super FX chip with Dylan Cuthbert from Argonaut Software (who is now at Q-Games) as their assistant, so that it can be used in Super NES games to create polygonal 3D graphics. The first game that used the Super FX was Star Fox, which became a success. After the release of Star Fox, Nintendo and Argonaut began conducting various experiments throughout the co-development of the Super FX chip. The development of Stunt Race FX, which was tentatively titled as FX Trax back then, started when Giles Goddard and Colin Reed joined in and later became Nintendo employees. Nintendo used the polygon concept to create a 3D-animated racing game filled with high-flying stunts and obstacles, as well as normal racing. While the game was solid, the overall product quality and timing of release weren’t favorable to its success. Nintendo has since discontinued the idea of franchising the series. The one prior incident took form with a canceled sequel on the Nintendo 64 called Buggie Boogie. Wataru Yamaguchi (?) created the official clay models of the Stunt Race FX vehicles used on the Japanese version’s box art and the instruction booklet of all versions.


Marketing


The limited edition, F-Type-based diecast car in its unopened, officially-sealed wrap.


Two different television commercials were made and aired: one for Japan and one for North America and Europe. The Japanese commercial was a short Japanese animation showing the vehicles from the game in action along with gameplay footage of the game itself. In the commercial for North America and Europe, it showed a police officer talking to viewers who he thinks are breaking the law(s) while some gameplay footage of the game itself were shown.


Around the time Stunt Race FX was released in the United States, Nintendo of America teamed up with Kellogg’s and Mattel to give away a promotional, Hot Wheels brand, F-Type race car to people who mailed two proofs from boxes of Apple Jacks to Kellogg’s to receive it for free. The television commercial for it showed the toy car move across a kitchen table in front of a box of Apple Jacks while a young, blonde-haired boy wearing glasses looks at the toy car from behind the box of Apple Jacks. At the same time, the announcer in the commercial said “Now you can get the Super NES Stunt Race FX car free, with two proofs from Kellogg’s Apple Jacks.” Followed by a pit crew refilling the boy’s bowl with Apple Jacks and milk and taking care of other things around him like clearing his glasses while the announcer said “It’s almost like the real thing.” This marketing idea didn’t support Stunt Race FX’s sales in the United States much. Currently, the limited-edition F-Type car is quite rare, especially the ones that are still factory-sealed.


Reception


 Reception


Aggregate scores


Aggregator


Score


GameRankings


86% (based on 2 reviews)


Review scores


Publication


Score


Electronic Gaming Monthly


6.5 out of 10[citation needed]


GameSpot


7.8/10.0


Nintendo Power


4 out of 5


Videogames NZ


92 of 100


AllGame


3.5 of 5


GamePro


72%


Bad Influence!


4 out of 5


Nintendo Magazine System UK


95%


Edge


90%


Game Players


90%


Game Zero


94 out of 100


Despite the game’s sales, popularity and marketing all being poor, most reviews of the game were positive. Nintendo Magazine System UK, a British magazine gave it a nearly perfect 9.5 out of 10. In Vol. 2 issue 5 of Game Zero, another video game magazine, the game scored a 94 out of 100, saying the controls are “out of this world!” and the “attention to detail is truly superior”. Edge gave it a 9 out of 10 rating, while stating that Stunt Race FX is “one of the best racing games currently available for any home system.” In season 3’s third episode of a mid 1990s British factual television programme Bad Influence!, a few reviewers combined their ratings into an overall score of 4 out of 5. AllGame, an online video game website, gave it a 3.5 out of 5.


However, on the negative side, GamePro gave it a 72% and thought Stunt Race FX wasn’t realistic. They also thought the racing game “still delivers a good time, especially if you’re not old enough to drive.” Electronic Gaming Monthly gave the game a 6.5 out of 10. EGM responded positively to the game’s track design, though criticized the game for the controls, thinking Stunt Race FX “feels awkward with the touchy steering” and not being as fast as most other racing games.


Related releases


Cameos


The Arwings from the Star Fox series made a cameo appearance in this title. In the Night Cruise track, when you bump a vehicle you are controlling into one of the first three Star Fox bill boards, an Arwing will drop a Boost power-up in front of you, before you enter the first tunnel. In the Sky Ramp track, all four Arwings of the Star Fox Team will fly around in an air show-style.


Some billboards very briefly appear on courses with the faces of Mario, Fox McCloud, and Kirby.


Other appearances in media


In the Wii game, Super Smash Bros. Brawl, two vehicles from Stunt Race FX appeared as two of the many Stickers to obtain. One was F-Type, the other was TRAILER (which was referred to as “Tractor Trailer”). The name of their origin was referred to as “Wild Trax” instead of “Stunt Race FX”; however, Stunt Race FX was mentioned in the Chronicles section of the same Wii game.[citation needed] A song (whether arranged or not) was planned to be added to the song list of the Wii game, but then was cancelled for unknown reasons.[citation needed]


Soundtrack


Wild Trax – Rare Tracks for Driving


Soundtrack by Shinobu Amayake (original)


Yoshiyuki Ito (Tracks 1 and 2)


Akira Hoshi (Track 3)


Released


September 21, 1994


Recorded


1994


Genre


Video game music


Label


Sony


Wild Trax – Rare Tracks for Driving is the soundtrack for Stunt Race FX. The album was a collection of original music composed by Shinobu Amayake, as well as many sound effects. It also included arranged music by Yoshiyuki Ito and Akira Hoshi, and was released by Sony Records only in Japan on September 21, 1994. The album is currently quite rare.


Wild Trax – Rare Tracks for Driving track list


#


Title


Length


1.


“Title ~ Aqua Tunnel”  


5:40


2.


“Easy Ride ~ Sky Ramp”  


4:50


3.


“Sunset Valley ~ Night Owl”  


5:09


4.


“Title”  


1:52


5.


“Select Men”  


0:25


6.


“Start Fanfare (Speed & Battle Trax)”  


0:07


7.


“Start Fanfare (Stunt Trax)”  


0:08


8.


“Easy Ride”  


2:01


9.


“Aqua Tunnel”  


1:52


10.


“Sunset Valley”  


1:35


11.


“Night Owl”  


1:37


12.


“King’s Forest”  


1:24


13.


“White Land”  


1:31


14.


“Lakeside”  


1:44


15.


“Sky Ramp”  


1:49


16.


“Up’N Down”  


1:25


17.


“Blue Lake”  


2:10


18.


“Bonus”  


1:02


19.


“Radio Control”  


0:54


20.


“Goal Fanfare”  


0:07


21.


“Goal”  


0:32


22.


“Lizard”  


0:32


23.


“Ending”  


2:22


24.


“Engine On (4WD ~ Coupe ~ F-Type ~ 2WD ~ Trailer)”  


1:07


25.


“Bekishoutotsu On”  


0:05


26.


“Chakuchi On (1 ~ 4)”  


0:12


27.


“Shoutotsu On”  


0:20


28.


“Crash (1 ~ 2)”  


0:08


29.


“Rakuseki”  


0:06


30.


“Inazuma”  


0:04


31.


“Yukidaruma”  


0:05


32.


“Rakka On”  


0:05


33.


“Ku”  


0:15


34.


“Boost”  


0:05


35.


“Kaifuku”  


0:06


36.


“Mizu Shibuki”  


0:05


37.


“Kamome”  


0:06


38.


“Kyouryuu”  


0:05


39.


“Tori”  


0:06


40.


“Iruke”  


0:05


41.


“Kansei”  


0:06


42.


“Jet Ki”  


0:11


43.


“Irwin”  


0:06


44.


“Trailer Tsuuka”  


0:05


45.


“Boost Lost”  


0:05


46.


“Parts Gattai”  


0:06


47.


“Damage Keikoku”  


0:07


48.


“Gyakusou Keikoku”  


0:06


49.


“Daibokuhatsu”  


0:07


50.


“Slip”  


0:07


51.


“Brake”  


0:06


52.


“Dirt Soukou”  


0:06


53.


“Kyousoukou On”  


0:07


54.


“Pause”  


0:16


55.


“Time Kasan”  


0:08


56.


“Lap Tsuuka”  


0:06


57.


“Time Up”  


0:05


58.


“Retire”  


0:05


59.


“Frog Catch”  


0:05


60.


“Start Signal”  


0:07


61.


“Cursor”  


0:05


62.


“Cursor Kettei”  


0:06


63.


“Cancel”  


0:06


64.


“Window Open”  


0:05


65.


“Window Close”  


0:05


66.


“Shutter”  


0:05


67.


“Star Catch”  


0:06


68.


“Gong”  


0:06


69.


“Yuki Nadare”  


0:05


70.


“Chuukan Get Tsuuka”  


0:04


References


Nintendo portal


^ a b “N-Sider.com: Stunt Race FX”. N-Sider.com. http://www.n-sider.com/gameview.php?gameid=106&view=credits. Retrieved 2008-06-02. 


^ “SNES Document 1?. www1.linkclub.or.jp. http://www1.linkclub.or.jp/~clubey/other%20platforms/snes4.html. Retrieved 2009-01-20. 


^ “N-Sider.com: Stunt Race FX”. N-Sider.com. 2007-12-13. http://www.n-sider.com/gameview.php?gameid=106&view=dev. Retrieved 2007-12-13. 


^ ” – “. www.1101.com. 2007-09-11. http://www.1101.com/nintendo/pikmin_artwork/01.html. Retrieved 2007-09-11. 


^ “CM1994?. majipon.hp.infoseek.co.jp. http://majipon.hp.infoseek.co.jp/nintendo/94/1994nintendofc.htm. Retrieved 2008-06-21. 


^ “Kaijin Zona + Wild Trax aka Stunt Race FX”.


About the Author:
I am a professional writer from China Quality Dress, which contains a great deal of information about stain removal leather , leather stain remover

]]>

View the original article here

Automobile Mold Industry Development Analysis – Childrens Wall Stickers – Removable Closestool

In the domestic auto industry is developing rapidly today, the mold industry, largely as a measure of a car manufacturer as well as a national symbol of the development level of the automobile industry. However, the reporter has learned that the body of China’s imports in 2004 amounted to 200 million U.S. dollars mold, mold almost all luxury cars from abroad.


In order to mold the development of China’s automobile a more detailed understanding of the reporters came to FAW Die Manufacturing Co., Ltd., an interview with Die & Mold Industry Association of China, FAW Die Manufacturing Co., Ltd., General Manager Chu Corzine and the automotive industry experts either die Zhan Mou.


A shortage of low-end high-end melee “Over the last two years, the auto industry’s rapid development has greatly accelerated the car body and die industry, the rapid development of China’s auto industry is faced with mold never had the huge business opportunities.” Corzine told reporters Chu In 2004, die output value of more than 530 billion yuan more than the original “15? Plan 2005 goal of 49 billion yuan more than 40 billion yuan. Sales of motor vehicles covered by mold industry, the average annual growth rate even higher than the overall level of the estimated average annual growth rate of nearly 20%.


But in this rapid development, Chu Corzine also to a reporter’s question, China’s mold industry, the potential risk?? Compared to China’s mold industry and foreign countries, the overall level is not high, mold on the market high-end products in short supply, the low-end state of the market in the melee. According to his analysis that such a crisis constraining the great development of China’s automobile industry.


Chu Corzine reminded this reporter one can not be ignored the fact that “China is merely mold-producing country, can not be called strong mold. At present, many molds can produce some technology companies have low levels of mold, so called enterprise engaged in the domestic mold vicious price competition, the frequent occurrence of family on the football at each other in order to lower prices, and even a loss of value traded. has a production capacity of high-end products businesses, small number, resulting in a shortage of high-end products, in short supply. “


According to Chu Corzine introduced, although the past decade, China’s mold industry has a certain development, but in the United States, Japan and other developed countries in the automotive industry, mold industry more than 50% of the products in the automotive mold. In China, only 1 / 3 of the mold products for the automotive manufacturing services. Moreover, the manufacture of bumpers, instrument panel, fuel tank, steering wheel and other such medium-sized plastic mold, industry production capacity from the current perspective, to meet the rate was only about 50%.


This situation has also led to China’s total annual number of imported vehicles are high mold. Zhan Ren automobile mold industry experts to seek the interview with this reporter set out to reporters that a group of figures, in automobile production, including body outside the body, engine, interior, etc., more than 90% of the parts required in accordance with * Mold molding, manufacturing an ordinary car is about 1000 sets of stamping dies, more than 200 pieces of interior mold. In these molds, about 90% or so is not a “Made in China”, the vast majority of middle-grade automobile mold dependence on imports, particularly cars outside the coverage of mold 80% imports.


Insufficient capacity to develop die “Now, new models, the speed faster and faster, can mold and manufacturing development not keeping pace with China’s auto industry growth rate. In addition, since the introduction of foreign enterprises for a long vehicle models, and no one believed that the Chinese competent , and abroad, will not let you make money in this regard. For example, Audi, Sonata, Honda, Toyota most die a lot of models are imported, manufactured in China are using some non-critical molds. foreign to find ways to require mold imports. “Chu Corzine believes that this problem occurs mainly due to the development of our innovation and production can not keep up.


Chu Corzine said he was in the car, many large foreign companies learned the process of inspection, foreign body mold development can be in a relatively short period of time. “5 years ago, the world body molds to complete development time takes about 24 months, three years ago, needed 18 months, and now need only 12 months. At present, Japan’s development speed is the fastest, just 8 months. This development speed of China’s much slower. “


Ren Zhan Mou believes that the automotive industry to measure a country’s overall competitive strength, not just from the number of automobile production point of view, but also in the car self-development, manufacturing levels and abilities of our comprehensive consideration. As the automobile production in more than 90% of the parts depend Molding, we can say, car mold technology is an important automobile manufacturing process based on the world’s automobile manufacturing industry with the fundamental conditions of competition. At present, China Automobile Mold technical level and capacity even after 10 years of development, progress rapidly, but in the world automotive industry is still in the middle of a low level.


“Domestic automobile manufacturers are not a lot of mold, but the market is high-quality molds neighboring countries and regions, the mold factory occupation, and if we do not recognize the seriousness of the matter, China’s auto industry is like no roots, but also do to survive ? “Ren Zhan, China’s current right to seek the status of the industry is very concerned about mold.


Institutional change and technological innovation are the key to a very high level of Die & Mold Industry


The rapid development of the automotive industry to domestic mold companies unprecedented challenges and opportunities, how to grasp the opportunity to keep up the pace of development of automobile industry, is placed in front of a domestic mold industry problems to be solved. “From the technology point of view, high-precision, low cost, short delivery time mold the future development of a trend, but we want to catch up with advanced international level, technological innovation is a vital part.” Chu Corzine analysis, “Auto Mold Factory how to achieve the merger and reorganization under the new situation, to improve their ability to successfully achieve institutional change is what we should be considered in the development process of the problem.”


About the Author:
The e-commerce company in China offers quality products such as Childrens Wall Stickers , Removable Closestool Sticker, and more. For more , please visit

]]>

View the original article here